Specs:

~ Suspension 2" drop & 2" bump = 4" of travel
~ Turn angle is 30 degrees.
~ Rack 3.5 or 2.4 turns lock to lock.
~ Weight is approx 60/40 with driver
~ Standard car fits 6' 5" driver.
~ Lgth 3125mm-10' 3" width 1725mm-5' 8"
~ Ht 1125mm -3' 8"
~ Wheel base 2425mm - 8' 0"
~ 5" of road clearance
~ Gallery wheels 17x7, tire size is 205-40-17
~ Wheels 4 x 108 offset 40mm & 25mm spacer rear with 12mm standard Ford offsets.
~ Total Car Weight 1100 lbs +-

Comprehensive kit is £3399+ Shipping

Including all the components:

~ Fully triangulated space frame chassis
~ Full set of wishbones
~ Full set of ball joints
~ Full set of suspension bushs & insert tubes
~ 4 adjustable shock absorbers
~ 4 coil over springs 200 lbs Ft, 300 lb Rear
~ Pair of rear uprights hubs/bearings
~ Pair of rear camber adjusters
~ Alloy floor panel cut to size
~ Alloy front bulkhead cut to size
~ Alloy rear bulkhead cut to size and folded
~ Alloy fuel tank to take Focus pump/sender
~ Locking gas cap
~ Two alloy pipes to extend to front radiator
~ Front and rear grille mesh
~ Two GRP side panels
~ GRP engine cover
~ GRP hood
~ GRP front grille
~ GRP rear panel
~ GRP dash board
~ Four GRP fenders

~ Two rear fender brackets
~ Two front fender brackets
~ Plexiglas fly screen cut to size
~ Steering rack & extensions
~ Used pair front uprights w hubs bearings

~ Colors; kawi green, red, yellow, orange
~ Build guide

Optional extras:

~ Pair of GRP seats
~ Roll bar
~ Powder coat to chassis & suspension parts
~ Lights/loom/fuses/relays/switches/etc
~ Stainless steel exhaust (ex. donor manifold)
~ Aluminum Spindles
~ Front Wings
~ 'Quick Steering Rack' 2.4
~ Hub to suit Ford upright, blank or 4 x 108
~ Alloy pedal set with balance bar & 3 master cylinders